Manipulator, left/right hand neutral for placement on left and right sides of probing setup. Fine controls are in-line and easily accessible from the rear of the manipulator.

Compact footprint
Left/right neutral (all controls are rear of manipulator)
True linear motion
Recommended for probing < 1-micron targets
100 TPI XYZ drive
Vacuum or Magnetic base
Vacuum Manipulators come with 12″ vacuum tube and connector.

MODEL NUMBERS;
425-VM Vacuum Based Manipulator Left-Right Hand Neutral
425-MT Magnetic Based Manipulator Left-Right Hand Neutral
425-MT-SW Switchable Magnetic Based Manipulator Left-Right Hand Neutral

Manipulator, left or right hand (XYZ controls forward facing when placed on corresponding side of probing setup). Miniarc motion. Recommended for probing > 1-micron geometries. 100 T.P.I XYZ drive. Requires probe holder (order separately). High profile base for use on probe stations with the wafer chuck above the platen or low profile base for use on probe stations with the wafer chuck is below the platen. Vacuum Base manipulators require customer supplied vacuum.

Miniarc motion.
Left/right hand versions
Recommended for probing < 1-micron targets
100 TPI XYZ drive
Vacuum or Magnetic base
Vacuum Manipulators come with 12″ vacuum tube and connector.

MODEL NUMBERS;
450/560VM   Left Hand Vacuum Base Manipulator
450/660VM90   Left Hand Vacuum Base Manipulator Low Profile
450/360MT-6   Left Hand Magnetic Base Manipulator
450/560MT90   Left Hand Magnetic Base Manipulator Low Profile
550/560VM   Right Hand Vacuum Base Manipulator
550/660VM90   Right Hand Vacuum Base Manipulator Low Profile
550/360MT-6   Right Hand Magnetic Base Manipulator
550/560MT90   Right Hand Magnetic Base Manipulator Low Profile

Manipulator, left/right hand neutral for placement on left and right sides of probing setup. True linear motion. Fine controls are in-line and easily accessible from the rear of the manipulator. Nose piece includes convenient “Quick Z” feature for fast adjustment in the Z-axis.  Adjustable nose piece, rotation, and height. Recommended for setups requiring efficiency, flexibility, and for geometries < 1-micron. 2525 manipulators are 200 T.P.I. drive. 525 are 100 T.P.I. drive.  When you need efficiency and performance, these manipulators are the manipulators of choice.

Quickly lift & lower probes with “Quick-Z” feature
Fully adjustable nose piece (rotate, height)
Left/right neutral (all controls are rear of manipulator)
True linear motion
Recommended for probing < 1-micron targets
100 TPI (525) and 200TPI (2525) XYZ drive
Vacuum or Magnetic base
Vacuum Manipulators come with 12″ vacuum tube and connector

MODEL NUMBERS;
525-VM-2 Vacuum Based Manipulator   – Left-Right Hand Neutral
525-MT Magnetic Based Manipulator     – Left-Right Hand Neutral
2525-VM-2 Vacuum Based Manipulator – Left-Right Hand Neutral
2525-MT Magnetic Based Manipulator   – Left-Right Hand Neutral
2525-MT-SW Switchable Magnetic Based Manipulator – Left-Right Hand Neutral
525-MT-SW Switchable Magnetic Based Manipulator – Left-Right Hand Neutral

High-Frequency Manipulator, left/right hand neutral.  True linear motion.  Includes fine XYZ control.  Fine controls are in-line and easily accessible from the rear of the manipulator.  With microwave head adapter. 

Available in both Vacuum or Magnetic base.
Left/right neutral
Recommended for probing < 1-micron targets
100 TPI XYZ drive
Vacuum or Magnetic base
Terminates in 3-hole mounting ledge for popular coplanar probe heads.
Straight configuration for left/right manipulator placement.
Supports GS, SG, GSG, and other popular probe head configurations.
Planarity (Roll) adjustment = +/- 5-degree.  Resolution = 0.005 degrees per degree rotation.
Theta (Yaw) adjustment: Range = +/- 5 degrees.  Resolution = 0.005 per degree rotation.

MODEL NUMBERS;
mmW-MAN-MT (Magnetic)
mmW-MAN-VM (Vacuum)
mmW-MAN-MT-90 (Magnetic)
mmW-MAN-VM-90 (Vacuum)
mmW-MAN-MT-SW (Switchable Magnetic)
mmW-MAN-MT-90-SW (Switchable Magnetic)