LatticeAx Options and Consumables Archives - Mercia Semiconductor

CleanBreak Pliers – 8″ Pliers (54362 Previous Part #CWBR-200)

steve — Thu, 29 Jul 2021 12:52:40 +0000

CleanBreak™ pliers (54362) are a useful tool for cleaving samples, post scribe, from full wafers down to 20 mm pieces. The pliers come with two styles of jaws to cleave a wide variety of substances: Three-Point Jaws, for cleaving crystalline substrates. These jaws cleave by providing pressure on the sample underneath the scribe and two [...]

The post CleanBreak Pliers – 8″ Pliers (54362 Previous Part #CWBR-200) appeared first on Mercia Semiconductor.

Large Sample Platform (54305 – Previous Part #MC-LSPL-200)

steve — Tue, 14 Jul 2020 13:41:34 +0000

Add the Large Sample Platform to any LatticeAx Indenting and Cleaving System to support large samples or a whole wafer up to 300 mm. This provides additional stability for a clean and accurate sample.

The post Large Sample Platform (54305 – Previous Part #MC-LSPL-200) appeared first on Mercia Semiconductor.

LatticeAx Standard Diamond Indenter (54301 Previous Part #DK-K-101)

steve — Tue, 14 Jul 2020 13:41:06 +0000

Custom diamond indenter for the LatticeAx. The LatticeAx indenter is easily replaced by the user and comes with screws, Allen wrench. For installation instructions view the video at: https://www.youtube.com/watch?v=VZKquLCApe0

The post LatticeAx Standard Diamond Indenter (54301 Previous Part #DK-K-101) appeared first on Mercia Semiconductor.

LatticeAx Options Package (54304)

steve — Tue, 14 Jul 2020 13:40:38 +0000

Make sure you have everything to set up your cleaving workflow. This package includes 2 spare LatticeAx diamond indenters and everything necessary for cleaving large substrate, wafers and pieces.

The post LatticeAx Options Package (54304) appeared first on Mercia Semiconductor.

LatticeAx “Short” Indent-Diamond Indenter (54302 Previou Part #DK-K-101.5)

steve — Tue, 14 Jul 2020 13:40:14 +0000

The LatticeAx short diamond indenter is designed to make an indent approximately half the length of the standard diamond indenter (0.5mm). The LatticeAx short indent diamond indenter comes pre-aligned in the same shank as the standard indenter. There is no change in installation or handling procedures.

The post LatticeAx “Short” Indent-Diamond Indenter (54302 Previou Part #DK-K-101.5) appeared first on Mercia Semiconductor.

LatticeAx High Angle Diamond Ind (54303 – Previously DK-K-200)

steve — Tue, 14 Jul 2020 13:39:53 +0000

Custom high angle diamond indenter for the LatticeAx. High angle diamond indenter for the LatticeAx. Standard 1 mm indent. Polished end for improved positioning. Indenter is has a 60 degree angle and is used for applications that routinely require cleaving targets with ultra-high accuracy. The LatticeAx indenter is easily replaced by the user and comes [...]

The post LatticeAx High Angle Diamond Ind (54303 – Previously DK-K-200) appeared first on Mercia Semiconductor.

Pelco Small Sample Cleaver (54367)

ewebzuk — Wed, 01 Jul 2020 11:59:30 +0000

Using simple mechanics, the small sample cleaver (SSC) uses a novel sample holder and a cleaving platform to safely cleave samples into chips as small as 2x2 mm. The novel sample holder allows samples from 4-10 mm to be held during indenting and cleaving. No more handling samples directly with fingers. Gloved hands are ok, [...]

The post Pelco Small Sample Cleaver (54367) appeared first on Mercia Semiconductor.

Small Sample Cleaving Pliers (54363)

ewebzuk — Wed, 01 Jul 2020 12:49:29 +0000

The Small Sample Cleaving Pliers are a unique non-marring cleaving tool. These LatticeGear custom handheld cleaving pliers cleave samples below 30 mm into smaller pieces. The nylon jaws do not damage your sample and include scribe alignment indicators to aid in accuracy of cleaving. The double leaf spring at the fulcrum make the pliers easy to [...]

The post Small Sample Cleaving Pliers (54363) appeared first on Mercia Semiconductor.

CleanBreak Pliers – 6″ Pliers (54361 Previous Part #CWBR-100)

ewebzuk — Wed, 01 Jul 2020 12:04:53 +0000

Our CleanBreak™ pliers are a comprehensively useful tool for cleaving samples, post-scribe, from full wafers down to 30 mm pieces. The pliers come with two styles of jaws to cleave a wide variety of substances: Three-Point Jaws, for cleaving crystalline substrates. These jaws cleave by providing pressure on the sample underneath the scribe and two [...]

The post CleanBreak Pliers – 6″ Pliers (54361 Previous Part #CWBR-100) appeared first on Mercia Semiconductor.