7A Tungsten Fine Probe Tip (Box of 10)
Ideal for small geometry probing. The point is thin enough for probing finest lines on a small pitch.
Tip diameter prior to sharpening: .005”
Point radius: 0.35um
Point taper length: .020”
Included angle: 14-deg
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”.
Material: Nickel shank, Tungsten tip.
7B Tungsten Fine Probe Tip (Box of 10)
Ideal for general purpose probing. Gold Plating & Larger Tip Radius Available.
Tip diameter prior to sharpening: Selectable above
Point radius: 0.5um Standard
Point taper length: .060”
Included angle: Varies
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”
Material: Tungsten or Gold Plated Tungsten
7C C-Bend Dumet Probe Tip (Box of 10)
Dumet wire is the basic metal component of a Lead-in-Wire. A diode header wire. With required vacuum tight glass-to-metal seal. Dumet material with bendable shank and cat whisker pure tungsten tip.
Tip diameter prior to sharpening: .005”
Point radius: 0.35um
Point taper length: .250”
Included angle: 14-deg.
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”
Material: Dumet
7D Tungsten Carbide Probe Tip (Box of 10)
Cutting Probe Tip. A single piece probe made from tungsten carbide wire. The point is ground, not etched. Allowing for a larger point radius & tolerance.
Point radius: 5um +/- 2µm variance
Point taper length: .075”
Included angle: 15°
Overall length: 1.4″
Shank diameter: .020”
Material: Tungsten Carbide
7H Beryllium Copper Probe Tip (Box of 10)
Ideal for applications requiring low contact resistance.
Tip diameter prior to sharpening: .020”.
Point radius: 1.0um
Point taper length: 0.135”
Included angle: 8-deg
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”.
Material: Beryllium Copper.
7F Tungsten Cat Whisker Probe Tip (Box of 10)
Cutting Fine tip with bendable shank, for small geometry & temperature stress probing.
Tip diameter prior to sharpening: .001”
Point radius: 0.5um
Point taper length: .0027”
Included angle: 21-deg.
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”
Material: Nickel shank, Tungsten tip.
7X Tungsten Cat Whisker Fine Probe Tip (Box of 10)
Ideal for general purpose probing. Same as model 7B but with shorter overall length.
Tip diameter prior to sharpening: .003”.
Point radius: 0.1um
Point taper length: .013”
Included angle: 13-deg
Overall length: 1.4″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”.
Material: Nickel shank, Tungsten tip.
7S Compliant S-Wire Shape Tungsten Fine Probe Tip
Ideal for thermal & other applications requiring a flexible tip.
Tip diameter prior to sharpening: .005”.
Point radius: 0.35um
Point taper length: .020”
Included angle: 14-deg.
Overall length: 1.6″ (Tip length may be trimmed by customer as needed).
Shank diameter: .020”.
Material: Tungsten tip with S-shape.